Stirrer Accessories
MSC Dynalon Perforated Stir Blade, HDPE, FDA Compliant, Non-Sterile
This perforated stir blade is constructed from durable HDPE, offering reliability for various liquid handling and mixing applications. It is compliant with FDA standards.
- Made from HDPE material.
- FDA compliant resin/materials.
- Non-sterile.
- Not autoclavable.
- Overall length of 22.23 cm.
- Overall width of 8.9 cm.
- Threaded components are interchangeable for a versatile and modular system.
Med Vet International 3.5mm x 18mm Titanium Cortical Self-Tapping Screws, J1074BT, 6-Pack
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.
Chemglass Life Sciences Agitator, PTFE, 60°, 100mm OD Blade, Fits 16mm OD PTFE Covered SS Shafts
Agitator, PTFE, 60¿, 100mm OD Blade, Fits 16mm OD PTFE Covered SS Shafts. Agitator blades are constructed of PTFE with a glass filled PTFE locking nut. This enables them to be attached to the shaft in any vertical position. Note: Designed for use with CG-2079-X, CG-2078-X or CG-2096-X PTFE Covered stainless steel type shafts
Bellco Glass, Inc. Low Profile PTFE Impeller Assembly ,6 L
The Bellco low profile ptfe impellers are designed to be used with bellco low profile cell culture vessels. These low profile impeller consist of a semi-rigid ptfe blade, ptfe paddle holder and stainless steel shaft. Impellers are shipped fully assembled. Paddle Size: 3"Tx 6 3/4"W. Requires Bellco Overhead Drive & Cap Assembly. MADE IN THE USA
Bellco Glass, Inc. Over Head Drive Adj Paddle, 8-36L
Over head drive adjustable paddle 8-36l MADE IN THE USA.
Chemglass Life Sciences Stirrer Blade, PTFE, 10mm, for 20000mL Flasks, 24mm Width x 160mm Length, 29/42 minimum joint clearance
Stirrer Blade, PTFE, 10mm, for 22000mL Flasks, 24mm Width x 160mm Length, 29/42 minimum joint clearance. Stirrer blade made of 1/8" thick solid PTFE for use with both Chem-Stir and button style stirring shafts having a 10mm OD.
Bellco Glass, Inc. Stainless Steel Over Head Drive Impeller Assembly , 6L Full Width
Manufactured from 316l stainless steel for standard bioreactor vessels. Use with over head drive motors. MADE IN THE USA. PADDLE L X W (IN): 3 X 6 3/4".
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 75mm Dia, Fits Shaft Size 10mm, 60° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 75mm Dia, Fits Shaft Size 10mm, 60¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shape, Solid, 10mm, for 1000mL Flasks, 34/45 minimum joint clearance
Stirrer Blade, PTFE, Banana Shape, Solid, 10mm, for 1000mL Flasks, 34/45 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Blades are solid. Made of 1/8" PTFE to fit 10mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Bellco Glass, Inc. Stainless Steel Over Head Drive Short Width Impeller Assembly , 8L Short Width
Short width stainless steel folding impeller assembly for standard bioreactor vessels 8l. MADE IN THE USA. 316 l stainless steel Ra finish 32 micro inch or better (wxl) 3" x 6"
Bellco Glass, Inc. Stainless Steel Pitched Blade Impeller, 3L For 3L Bioreactor Systems
SST Pitched Blade Impeller MADE IN THE USA Material: 316l SST with electropolish finishEnglish threadOD: 1 3/4"For 5/16" od shaftsUsually requires 2 each
